9000 Heater Core
The first thing you do is remove the hood.
To do this, you need to disconnect the washer hose and disconnect the hood light.
The light has a connector below the rubber seal. Next, remove the two 12mm bolts on each side and then the clip for the hood shock.
Now you can remove the top cover of the false bulkhead.
To do this you just remove the eight 8mm bolts and the top just lifts off.
The next thing you need to do is remove the false firewall.
This is really easy on this car. Just unbolt the MAP sensor, TCS safety valve, and wiring harness clip.
Then there are just two screws holding the false firewall on.
The next thing to do is to pull off the heater core hoses.
There are two hoses coupled together with a plastic fitting.
You need to remove all of the hoses to make room to get the blower out.