To remove the seat, remove the 4 main bolts. You do this by moving the seat all the way forward to get the rear bolts and then all the way backwards.
Now recline the seat all the way forward to make it easier to remove from the car.
Before you can pull out the seat you need to pull off the seat belt. To do this you need to push in the tab and pull up on the belt.
To make this easier, I decided to remove the whole side pod. You will have to remove it at some point, so I just did it now.
There are 3 screws holding the side cover on. One screw is in the front under the seat. The other two are hiding behind screw cover.
Pry out the two screw covers and remove all of the screws. Pull the cover down and forward to remove it.
Now push in seat belt tab and pull out seat belt.
Now you can pull out the seat!!